DK7632(Flush) Brass Type Wire-Cut Machine

|
 |
 |
Product Feature
The worktable of X,Y is in the fore part of machine body and the taper worktable of U,V is at the front of column,whole sets structure get reasonble design. Submerge method enable machining more stable. Suitable for the machining of the medium-size precision workpiece.
Main Configurations:
- Imported ball-screw and linear guide-way for X/Y axis
- X/Y/U/V/Z adopt AC servo driver and motor
- Grundfos pumps
- Water-cooled air-condition system
- Stainless steel water trough
- Corrosion resistant marble worktable
Specibility:
Machine type | : | DK7632 |
 |
Worktable dimension (L×W) | : | 745×510mm |
 |
Worktable travel (X×Y) | : | 500×350mm |
 |
Travel (Z) | : | 270mm |
 |
Max.workpiece thickness | : | 260mm |
 |
Max.part weight | : | 700KG |
 |
Max taper angle/height | : | ±15°/100mm |
 |
Max.machining speed | : | >210 mm²/min |
 |
Best roughness | : | Ra0.8 µm |
 |
Machining method | : | Flushing |
 |
Diameter of wire | : | 0.15 ~ 0.3mm |
 |
Machine tool dimensions (W×D×H) | : | 1520 × 1575 × 2150mm |
 |
Machine weight | : | 2640kg |
 |
|
|