Giamac English 金迈科技中文网



JAPAN CNC LATHE
XY-1000

TAIWAN FIXED HEAD CNC LATHE
CHINA CNC LATHE

XY-1000 JAPAN CNC LATHE


XY-1000 Japan Lathe Machine




Product Feature
Wide Range of Milling with the Y-axis Function
Incorporating the Y-axis function in the dual spindle dual turret lathe allows for performance equal to that of two machines. With the addition of power tools like end mills, drills, and taps, revolutionary multi-axis control 3-D machining is realized.

Two Cutting Operations at Once !
Machining Variations Are Widened

By positioning two turrets vertically, simultaneous cutting of the same workpiece with two turrets can be performed in a short cycle time with high accuracy.

Ample Power and Storage of Power Tools
The high-speed servo turret incorporated with power tool units shortens idle time, and an AC3.7kW-drive motor is used for power tools, achieving high-power machining. Up to 12 power tools (on both turrets) can be installed. These tools increase machining capacity and are especially useful for extended unmanned operation.

Specibility:
Chuck size: 6 inch
Spindle bearing I.D.: φ85mm
Spindle speed: Max.5,000 (Min-1)
Tool post type : 12-station
Max. stroke: X:162.5(160: #2 turret) mm
Z:450mm Y:30mm A:475mm
Rapid Traverse Rate: X:18m/min Z:24m/min Y:12m/min A:30m/min
Spindle motor: AC7.5/5.5 kW
LW: 2,950mm 2,015mm
Controller: TAKAMAZ&FANUC



  HOME | ABOUT US | SERVICES | CATALOGUE | CONTACT US COPYRIGHT © 2013 GIAMAC TECHNOLOGIES SDN BHD. ALL RIGHTS RESERVED.