Giamac English 金迈科技中文网



最新产品
苏州三光数控线切割机
数控车床
油压机
FRAME TYPE HYDRAULIC PRESS
CMH-E1

FOUR COLUMN TYPE HYDRAULIC PRESS
数控转塔冲床
数控加工中心
车床
铣床
钻床
冲床
折弯机
剪床
台湾平面磨床
插床
空气锤
滚齿机

CMH-E1 SERIES FRAME TYPE HYDRAULIC PRESS


CMH-E1 SERIES FRAME TYPE HYDRAULIC PRESS




Product Feature
  • Welded strong frame body made of high quality integral steel plate ensures high rigidity under high pressure;
  • Pressing forcestroke of movable working table and time of pressing force holding can be easily adjusted according to the need of applications;
  • With different models, upper and lower knocking-out ejectors and cushions can be equipped with and used for knocking-out work piece after pressing and shallow drawing;
  • Short pressing force building time allows higher production efficiency;
  • Lower oil tank design makes more compact machine overall dimension and easies clean of the tank;
  • With high operating reliability and less trouble as a result of more than ten years improvement.


Application:
  • Stamping, forming, shallow drawing, die spotting, moulding and blanking etc. of metal or none metal parts;
  • Well suitable for pressing and forming of watch &clock parts, spectacle, photo frame, metal ornaments, lock parts, auto parts and hardware etc.




CMH-E1A SERIES TYPE HYDRAULIC PRESS WITH LOWER EJECTOR
Feature:
All the structure and specification are same as series CMH-E1 expect that this series is equipped with a lower ejector in the movable working table for knocking-out pressed work piece from mould. It can remove work piece from the lower mould after pressing and avoid work piece deformation caused by manual removal and any injury to operator so as to enhance operation efficiency and prolong working life of moulds.



CMH-E1B SERIES TYPE HYDRAULIC PRESS WITH UPPER EJECTOR
Feature:
All the structure and specification are same as series CMH-E1 expect that this series is equipped with an upper ejector in the fixed working table for shallow drawing(drawing length less than 70mm) and removing work piece from the upper mould after pressing (knocking out stroke less than 10mm). It can avoid work piece deformation caused by manual removal and any injury to operator so as to enhance operation efficiency and prolong working life of moulds.



CMH-E1C SERIES TYPE HYDRAULIC PRESS WITH UPPER EJECTOR Feature:
All the structure and specification are same as series CMH-E1 expect that this series is equipped with an upper and a lower ejector in the movable and fixed working table respectively for shallow drawing (drawing length less than 70mm) and knocking-out of work piece from both upper and lower moulds after pressing. It allows wide forming flexibility and can avoid work piece deformation caused by manual removal and any injury to operator so as to enhance operation efficiency and prolong working life of moulds.





  HOME | ABOUT US | SERVICES | CATALOGUE | CONTACT US COPYRIGHT © 2013 GIAMAC TECHNOLOGIES SDN BHD. ALL RIGHTS RESERVED.